Idaho's rules for contractors come from the Division of Occupational and Professional Licenses (DOPL). The Idaho Contractors Board, one of the boards inside DOPL, registers general contractors, remodelers, roofers, painters and most other building trades. Separate DOPL boards license electricians, plumbers and HVAC contractors. This guide covers who has to register, what registration tells you and what it doesn't, the trade licenses, and how to check a contractor before you sign. Each rule links to the Idaho Code section or DOPL page it comes from.

The short version

  • Construction work in Idaho needs a Contractors Board registration once a project reaches $2,000 in labor and materials (Idaho Code 54-5204, 54-5205).
  • To register, a contractor must carry general liability insurance of at least $300,000 and show workers' compensation coverage or why it isn't needed (54-5210). No bond is required.
  • Electrical, plumbing and HVAC contractors are licensed by their own DOPL boards under Idaho Code Title 54, chapters 10, 26 and 50.
  • On a home project over $2,000, the general contractor owes you a written disclosure about lien waivers, insurance, title insurance and bonds before you sign (Idaho Code 45-525).
  • You can check all of it on DOPL's registration search or by calling (208) 334-3233.

Registration, not a license

Idaho Code 54-5204 makes it unlawful for anyone to "engage in the business of" or "hold himself out as" a contractor in Idaho without being registered. DOPL's Contractors Board FAQ is direct about the difference: "The Act requires registration, not licensure." There is no state exam for a general contractor, and no experience requirement in the registration application.

That matters when you compare bids. A registration tells you the business identified itself to the state, swore to its application, and showed insurance. It does not tell you the contractor passed a test on building practice, and it does not tell you the contractor is good at your kind of project. References, inspections and a clear contract still do that work.

What counts as construction

Idaho Code 54-5203 defines construction broadly: building, altering, repairing, adding to, improving, moving, excavating or demolishing any building or other structure, project, development or improvement to real property. A contractor is anyone who undertakes, offers to undertake, bids on, or performs that work, directly or through others. The statute doesn't list trades one by one. Remodeling, roofing, siding, decks and window replacement are repairs, alterations or improvements to a building, which is the language it uses, and the $2,000 threshold below is the practical line.

The $2,000 threshold

54-5205(2)(f) exempts casual, minor or inconsequential work when the total contract price for labor, materials and everything else on the project is under $2,000. The exemption is gone if the work is part of a larger project or if the job is divided into smaller contracts to stay under the limit. If a contractor offers to write your $6,000 job as three $1,900 invoices, that is the evasion the statute describes.

Exemptions you might run into

Section 54-5205 lists 18 exemptions. The ones that touch a home project:

  • You, on your own home. An owner working on their own residential property doesn't need to register (54-5205(2)(l)). The exemption narrows for an owner who builds to sell and doesn't live in the home for at least 12 months.
  • A tenant working on the home they live in that someone else owns (54-5205(2)(p)).
  • Employees paid wages by a contractor or exempt person (54-5205(2)(a)). Subcontractors and independent contractors are not employees and are not exempt on that basis.
  • Suppliers who sell materials without installing them (54-5205(2)(e)).
  • Real estate licensees doing nominal repairs incidental to a sale (54-5205(2)(n)).
  • Holders of other Idaho licenses working within that license, such as electricians, plumbers and public works contractors (54-5205(1)). DOPL's FAQ says they generally don't need to register unless they work outside their license.

None of these exemptions lets a person advertise as a registered contractor.

What registration requires

An applicant files under oath. Idaho Code 54-5210 and DOPL's FAQ list what the application must include:

Requirement What the law says
Identity SSN or federal employer ID number, business name and address, names and addresses of the owners
Workers' compensation Proof the applicant has workers' compensation insurance, or a statement of why it isn't required
General liability A certificate for a general liability policy, including products and completed operations, of not less than $300,000 single limit
History Whether a license or registration was ever denied, revoked or suspended
Fee Set by the board; the statute caps it at $150 a year. DOPL's FAQ lists a $120 application fee

Once registered, the contractor must show the registration number at the business and on job sites, and on advertising, contracts, building permits, letterheads, purchase orders and subcontracts, according to DOPL's FAQ. If the number isn't on the bid or contract, ask for it.

Registration can be revoked or suspended for breaking the Act or board rules, including letting the required insurance lapse, for violating the Idaho Consumer Protection Act, and for dishonest or dishonorable dealings. Details are on the registration act page and the insurance page.

Electrical, plumbing and HVAC licenses

These three trades are licensed, with exams and classes of competency, by their own DOPL boards:

Trade Board Idaho Code Licenses a contractor can hold
Electrical Electrical Board Title 54, chapter 10 Electrical contractor; limited electrical contractor for narrower scopes
Plumbing Plumbing Board Title 54, chapter 26 Plumbing contractor; plumbing specialty contractor
HVAC HVAC Board Title 54, chapter 50 HVAC contractor; HVAC specialty and limited heating specialty contractor

The individuals doing the work also hold licenses or registrations (journeyman, apprentice), which appear on DOPL's search as separate records. For a homeowner the contractor license is the one to check, because it's the business you're hiring. See electrical, plumbing and HVAC for the license types and the permits each trade pulls.

Doing the trade work yourself

Each trade law has an owner exemption:

  • Electrical: a property owner may do noncommercial electrical work in the owner's primary or secondary residence and its outbuildings (54-1016(2)(a)).
  • Plumbing: an owner or contract purchaser may do plumbing in a single-family or duplex dwelling and its accessory buildings, and must meet the plumbing code's minimum standards (54-2602(1)(a)).
  • HVAC: the same owner or contract purchaser rule for a single-family or duplex dwelling, subject to the HVAC standards (54-5002(1)(a)).

The exemption is from the license, not from the code. Ask your building department or DOPL whether your project needs a permit and inspection before you start; the permit page explains who issues them.

Other agencies

  • Pest control. Pesticide applicators are licensed by the Idaho State Department of Agriculture, not DOPL (Idaho Code 22-3404). Ask an exterminator for the ISDA professional applicator license.
  • Lead paint. A paid contractor who disturbs paint in a home built before 1978 must be an EPA-certified firm under the Renovation, Repair and Painting rule. Idaho is not on EPA's list of states that run their own program (EPA RRP program). Search certified firms with EPA's locator. More on the lead-safe page.
  • Public works. Work for a city, county or school district needs a public works contractor license under Idaho Code Title 54, chapter 19. A homeowner hiring for a private project doesn't need that license from the contractor; see the public works page.

How to check a contractor

  1. Open DOPL's registration search. Search by the registration number from the bid, or by name (individual, business or DBA). DOPL says these results are real time and show more than its list search, including license history and discipline details.
  2. Confirm the record is active and look at the expiration date.
  3. Match the name. A business often registers under its legal name and works under a DBA. The record should show both. If the name on your contract appears nowhere, ask why.
  4. Check for discipline on the record.
  5. For electrical, plumbing or HVAC work, search again for the trade contractor license.
  6. Ask for a current certificate of insurance and call the insurer to confirm it. The registration file shows insurance was in place at registration; it can't show you today's policy.
  7. If anything is unclear, call DOPL at (208) 334-3233 or email BCRE-Licensing@dopl.idaho.gov.

Every registry listing on this site comes from DOPL's public list of active registrations and licenses, with the number shown on the contractor's page so you can run the same check.

Hiring an unregistered contractor

Working without a required registration is a misdemeanor punishable by a fine of up to $1,000, up to six months in county jail, or both (Idaho Code 54-5217). An unregistered contractor generally can't sue in an Idaho court to collect payment for work that required registration (54-5217(2)). DOPL's FAQ adds that an unregistered contractor can't obtain building permits and waives lien rights.

For you, the bigger risk is practical. A contractor who skipped registration may also have skipped insurance, and if a worker is hurt or a neighbor's property is damaged, you want a policy to send the claim to. What happens when a contractor isn't registered covers the rest.

After you hire

  • Get the disclosure. On a residential contract over $2,000 the general contractor must give you the Idaho Code 45-525 disclosure and keep your signed receipt. Before final payment you're owed a signed list of subcontractors and suppliers who did more than $500 of work. See homeowner disclosure rules.
  • Watch the lien deadlines. A contractor, sub or supplier has 90 days after finishing its work to file a lien claim with the county recorder, and must serve you a copy within five business days (Idaho Code 45-507). Lien waivers from subs protect you. More in Idaho's lien law.
  • Know where to complain. DOPL takes complaints against registrants and licensees (complaint process), and the Attorney General's Consumer Protection Division handles deceptive practices (consumer protection).

The hiring checklist walks through all of this in order.

Sources

Frequently Asked Questions

Does Idaho require a contractor license?

Idaho requires registration, not a license, for general construction. Under Idaho Code 54-5204 it is unlawful to work as a contractor in Idaho without registering with the Idaho Contractors Board. DOPL's FAQ puts it plainly: the Act requires registration, not licensure. Electrical, plumbing and HVAC work is different: those trades are licensed by their own DOPL boards.

At what dollar amount does an Idaho contractor need to register?

Registration applies once a project's total price, labor and materials together, reaches $2,000. Idaho Code 54-5205(2)(f) exempts casual, minor or inconsequential work under $2,000, but not when the job is part of a larger project or split into smaller contracts to stay under the limit.

Does Idaho contractor registration mean the contractor is insured?

It means the contractor showed proof of insurance to register. Idaho Code 54-5210 requires a certificate of general liability insurance, including products and completed operations, of at least $300,000 single limit, plus proof of workers' compensation or a statement of why it isn't required. Policies can lapse, so ask for a current certificate before work starts.

Do Idaho contractors need a bond?

Not to register. Idaho Code 54-5210 lists the application requirements and none of them is a surety bond. Under Idaho Code 45-525 a homeowner can ask for a surety bond on a residential project over $2,000, at the homeowner's expense.

How do I check an Idaho contractor's registration?

Search the business or person on DOPL's online registration search at edopl.idaho.gov/OnlineServices/?link=PubSearch, or call DOPL at (208) 334-3233. Confirm the status is active, the name matches the business on your contract, and check for discipline. For electrical, plumbing or HVAC work, look up the trade license too.