Heating, ventilation and air conditioning work in Idaho is licensed under Chapter 50 of Title 54, "Installation of Heating, Ventilation and Air Conditioning Systems." The Idaho HVAC Board at the Division of Occupational and Professional Licenses (DOPL) sets the standards. An HVAC licensee working within the license doesn't also need a general contractor registration (Idaho Code 54-5205(1)).
Furnaces, heat pumps, gas lines to appliances, boilers, gas fireplaces and ductwork all sit inside this chapter. In an Idaho winter, a furnace failure is an emergency. Check credentials before the first cold night, not during it.
The certificate requirement
It's unlawful for any person or business to do HVAC work in Idaho unless the person, or the responsible person representing the business, has passed an examination and holds a state certificate of competency. The certificate isn't transferable (Idaho Code 54-5008).
The four classes
Section 54-5009 sets four classifications:
| Class | Role |
|---|---|
| Apprentice | Learning and assisting. May not do HVAC work except under the supervision of a journeyman or HVAC contractor. Also covers specialty apprentices |
| Journeyman | Installs, extends, alters or repairs HVAC systems as a principal occupation, for and under the direction of an HVAC contractor, and has completed the board's required trade classes. Also covers specialty journeymen |
| HVAC contractor | A business that installs, maintains or repairs heating, ventilation or air conditioning appliances, or gas-fired equipment that needs special venting or gas supply piping |
| HVAC specialty contractor | Works in one aspect of the trade, such as gas piping, gas appliances and installation, or decorative gas-fired appliances. A hearth and barbecue certificate includes the low-voltage work those installs need |
DOPL's HVAC Board page also lists limited heating specialty apprentice, journeyman and contractor licenses.
For a gas fireplace insert, a specialty contractor may be the right license. For a furnace and AC replacement, look for an HVAC contractor.
Which codes apply
The chapter's purpose is to make sure HVAC installations follow the International Mechanical Code, the International Fuel Gas Code, and parts V and VI of the International Residential Code, starting from the 2006 editions and including later editions as adopted by the Idaho HVAC Board (Idaho Code 54-5001). DOPL's HVAC Board page lists the 2018 International Residential Code, International Fuel Gas Code and International Mechanical Code as current.
Local governments aren't required to run a mechanical inspection program. Those that issue mechanical permits must adopt and enforce the codes the chapter prescribes (54-5001).
Permits
When you need one
It's unlawful to do any construction, installation, improvement, extension or alteration of an HVAC system in any building without first getting a permit from the authority having jurisdiction. No permit is required for repair or maintenance of an existing HVAC system (Idaho Code 54-5016(1)).
| Job | Permit? |
|---|---|
| Annual furnace tune-up | Maintenance: no permit under 54-5016(1) |
| Replacing a failed igniter or blower motor | Repair: no permit under 54-5016(1) |
| Installing a new furnace, heat pump or AC | Installation: permit |
| Adding ductwork to a finished basement | Extension: permit |
| Running a new gas line to a range or fireplace | Ask; gas piping is within the chapter (54-5009(3), (4)) |
If you aren't sure which side of the line a job falls on, ask the building department before work starts.
Who issues it
The "authority having jurisdiction" is your city or county where it regulates and enforces HVAC by code or ordinance. Local governments may collect permit and inspection fees there, and cities may also do so in their areas of city impact (54-5016(4)). Otherwise the permit comes from DOPL, which offers Purchase a HVAC Permit and Request a HVAC Inspection links on its board page.
Combined permits
If a DOPL plumbing or electrical permit includes part of an HVAC installation, or a DOPL HVAC permit includes part of a plumbing or electrical installation, that one permit and inspection satisfy the other trades' requirements for that part (54-5016(2)). Board rules let DOPL add fees for the extra portion (54-5016(3)).
What HVAC licensees may do in other trades
Idaho lets HVAC licensees handle some connected work without a second license:
- Electrical: the circuit from a disconnect to HVAC equipment or a water heater when the disconnect is in sight of the unit and the circuit is no more than 50 feet; electric space heaters without ductwork; ventilating fans except ducted range hoods in homes; and control wiring of 24 volts or less for equipment of five tons or less (Idaho Code 54-1016(3)).
- Plumbing: gas piping, piping for hydronic systems, and boilers not otherwise subject to inspection by the industrial commission (Idaho Code 54-2602(1)(j)).
A new 240-volt circuit from your panel to a heat pump goes beyond that list. That part is for a licensed electrician. See the electrical license page.
The homeowner exception
The certificate requirements don't apply to any person who installs or maintains an HVAC system in a single-family or duplex dwelling, including accessory buildings, quarters and grounds, when that person owns or is a contract purchaser of the property. The person must still follow the chapter's standards and rules (54-5002(1)(a)).
The permit rule in 54-5016 is separate from the certificate rule. An owner installing a new system still needs a permit.
Other exceptions in 54-5002 cover farm buildings outside city limits, logging and mining camps that meet DEQ recommendations, employers' in-house HVAC staff, and certain nonprofit home builders and their volunteers on single-family homes.
License fees and terms
DOPL's HVAC Board page lists a $35 application fee and:
| License | Fee | Renewal | Term |
|---|---|---|---|
| Contractor | $225 | $150 | 3 years |
| Specialty contractor | $225 | $150 | 3 years |
| Journeyman | $150 | $75 | 3 years |
| Apprentice | $20 | $20 | 2 years |
DOPL says it began moving the HVAC Board to biennial licensure on October 30, 2026.
Penalties
It's a misdemeanor to do HVAC work without a certificate or registration, to work without a required permit, to violate the chapter or board rules, or to ignore a lawful order of the administrator. Violators are also subject to civil penalties up to $1,000 set by rule, and each day is a separate offense (Idaho Code 54-5022).
Before you hire
- Look up the business and the technician in DOPL's license search.
- Ask whether the job is a repair or an installation, and who will pull the permit.
- Ask for a certificate of insurance.
- For a full system replacement over $2,000 under a general contractor, expect the 45-525 disclosure.
Find HVAC contractors in your area, such as Idaho Falls HVAC, or compare Idaho HVAC costs. The Idaho licensing guide covers every trade, and complaints go through the DOPL complaint process.
Sources
- Idaho Code 54-5001, declaration of policy: mechanical, fuel gas and IRC codes, local programs
- Idaho Code 54-5002, exceptions: homeowner and other exceptions
- Idaho Code 54-5008, certificate a prerequisite
- Idaho Code 54-5009, classification of competency
- Idaho Code 54-5016, permits required: installation vs repair, combined permits, local fees
- Idaho Code 54-5022, violation: misdemeanor, $1,000 civil penalty
- Idaho Code 54-1016, electrical exemptions: HVAC licensee electrical scope
- Idaho Code 54-2602, plumbing exceptions: HVAC licensee gas and hydronic piping
- Idaho Code 54-5205, registration exemptions
- DOPL HVAC Board: current 2018 codes, fees, terms, permits, inspections, biennial transition
- DOPL license search
Frequently Asked Questions
Do I need a permit to replace a furnace in Idaho?
Idaho Code 54-5016 requires a permit from the authority having jurisdiction for any construction, installation, improvement, extension or alteration of an HVAC system, and exempts only repair or maintenance of an existing system. Installing a new furnace is an installation, so plan on a permit and ask your local building department or DOPL to confirm.
Can I install my own HVAC system in Idaho?
The certificate requirements don't apply to a person who installs or maintains HVAC in a single-family or duplex home they own or are buying, including accessory buildings. That person must still follow the chapter's standards and rules (Idaho Code 54-5002(1)(a)).
What codes apply to HVAC work in Idaho?
Idaho Code 54-5001 names the International Mechanical Code, International Fuel Gas Code and parts V and VI of the International Residential Code, with later editions as adopted by the Idaho HVAC Board. DOPL's HVAC Board page lists the 2018 editions as current.
What is the penalty for HVAC work without a license or permit?
It's a misdemeanor to do HVAC work without a certificate or registration, or to work without a required permit. Civil penalties set by rule can reach $1,000, and each day is a separate offense (Idaho Code 54-5022).