Idaho splits building permits between local governments and the state. Your city or county building department handles the building permit for a house, garage or addition, if it enforces building codes. The Division of Occupational and Professional Licenses (DOPL) handles state buildings and runs the state electrical, plumbing and HVAC permit programs for areas where local governments don't. The framework is the Idaho Building Code Act, Chapter 41 of Title 39.

Which codes Idaho adopts

Idaho Code 39-4109 adopts building codes for DOPL and sets the codes local governments must apply under 39-4116. The Idaho Building Code Board updates editions through negotiated rulemaking, and a new edition takes effect January 1 of the year after it is adopted (39-4109(4)).

The board's current rules, IDAPA 24.39.30, Rules of Building Safety, adopt:

Code Edition in IDAPA 24.39.30
International Building Code 2018, with Idaho amendments
International Residential Code, parts I, II, III and IX (the "Idaho Residential Code") 2018, with Idaho amendments
International Existing Building Code 2018
International Energy Conservation Code, residential and commercial 2018, with Idaho amendments
International Building Code mass timber provisions 2021

The residential code leaves out the IRC's parts on mechanical, fuel gas, plumbing and electrical work (39-4109(1)(b)). Those trades have their own codes and boards:

  • Plumbing: the Idaho State Plumbing Code, based on the Uniform Plumbing Code (54-2601)
  • HVAC: the International Mechanical Code, International Fuel Gas Code and IRC parts V and VI as adopted by the HVAC board (54-5001)
  • Electrical: the Idaho electrical code under Chapter 10 of Title 54 (54-1001B)

The state board may not amend the residential code to be more restrictive than the version the International Code Council publishes (39-4109(3)).

Local building departments

A local government that didn't already run a code program may start one by ordinance, and may contract with a public or private entity to run it (39-4116(1)). Those that issue building permits must adopt, by ordinance, the International Building Code, the Idaho Residential Code parts I-III and IX, and the 2018 Idaho Energy Conservation Code (39-4116(2)).

What locals may change

  • They may amend the adopted codes for local concerns if the amendment gives at least an equivalent level of protection (39-4116(4)).
  • They may amend the residential code's administrative chapter, definitions, design criteria in Section R301, and appendices (39-4116(4)(c)). Local design criteria sheets, such as those published in Coeur d'Alene and Twin Falls, list values like ground snow load and frost depth. See snow loads and building codes.
  • They may amend the rest of Part III only after finding good cause for building or life safety, holding a public hearing with published notice, and giving 30 days' notice to industry groups (39-4116(4)(d)).
  • They may not amend accessibility provisions, or adopt residential code or residential energy provisions the state board hasn't adopted or has rejected (39-4116(4)(a), (b)).

That's why the design criteria sheet in Coeur d'Alene looks different from the one in Twin Falls.

Statewide rules that override local choices

  • No sprinkler mandate for homes. Single-family homes and dwellings up to two units are exempt from code provisions requiring automatic fire sprinklers (39-4116(3)).
  • Agricultural buildings are exempt from the codes. A county may issue permits for them only to check road setbacks and utility easements, at no more than the county's actual cost (39-4116(5)). Barns, livestock shelters, grain silos, stables and similar buildings count; places where people live, sleep or cook don't.

When you need a permit

Idaho Code 39-4111 has two parts:

  • In a local jurisdiction enforcing building codes, it's unlawful to do any construction, improvement, extension or alteration of a building without a permit under the local ordinance (39-4111(2)).
  • For buildings under DOPL's purview, the permit comes from DOPL (39-4111(1)). DOPL's building FAQ explains that DOPL and the State Fire Marshal review plans for state-owned buildings, buildings on state land, and buildings occupied by a state agency (39-4103(2)).

What needs a permit, and what's exempt, such as small sheds or fences, is set by the local code and ordinance. Call your city or county building department before you or your contractor start. Ask for their adopted codes and design criteria sheet; many departments publish one.

No forced upgrades of existing work

A permit for an improvement can't require you to upgrade unaffected existing parts of a building that complied with the code in effect when they were built. The exception is a specific substantial safety hazard the new work would create. The building department carries the burden of proving the hazard and must identify it on the permit (39-4111(3)).

Registration on the permit

Before issuing any construction permit, the building department must ask for an Idaho contractor registration number and put it on the face of the permit. An exempt applicant's permit must read "no contractor registration provided" (Idaho Code 54-5209). The permit must be posted at the site. If you pull the permit yourself as owner, that phrase will be on it. See the Idaho Contractor Registration Act.

Electrical, plumbing and HVAC permits

Trade permits follow their own statutes:

Trade Who issues the permit Source
Electrical DOPL, unless your city or county runs its own electrical inspection program using the Idaho electrical code 54-1005, 54-1001B
Plumbing DOPL, unless your city or county enforces an equivalent plumbing code 54-2620
HVAC The authority having jurisdiction: your city or county where it enforces HVAC codes, otherwise DOPL 54-5016

Some rules worth knowing:

  • No one but the power supplier may energize a new electrical installation before a permit is bought, and the power supplier can't connect it until it passes inspection (54-1005).
  • No plumbing permit is needed to clear a stoppage or repair a leak without rearranging the system (54-2621).
  • No HVAC permit is needed for repair or maintenance of an existing system (54-5016).
  • A DOPL permit for one trade that includes part of another trade's installation can satisfy both.

Details are on the electrical, plumbing and HVAC pages. DOPL's Electrical, Plumbing and HVAC board pages have links to buy permits and request inspections.

Manufactured homes

DOPL's building FAQ says a manufactured home installation permit, and an installation tag for new homes, is required from DOPL before installation in areas without an approved local building program. Either the licensed installer or the homeowner may apply. All installations must be inspected and approved by DOPL or the local authority before the home is occupied.

Penalties

Willfully violating the Building Code Act, the adopted codes or the rules is a misdemeanor with a fine of up to $300, up to 90 days in jail, or both. Each noncompliant building is a separate violation, and each day is a separate offense (39-4126). Unpermitted trade work carries separate penalties under the electrical, plumbing and HVAC chapters.

Idaho permit checklist

  1. Find your jurisdiction. Inside city limits, start with the city. Outside, start with the county. In fast-growing Treasure Valley areas such as Kuna, Star and Middleton, check whether your parcel is in city limits or the county.
  2. Ask which trades the department covers. If it doesn't do electrical, plumbing or HVAC, those permits come from DOPL.
  3. Get the design criteria sheet for snow load, frost depth, wind and seismic values.
  4. Confirm who is pulling each permit and that the contractor's registration number is on it.
  5. Post the permit at the site and keep a copy with the final inspection.

For hiring steps, see the hiring checklist and the Idaho licensing guide.

Sources

Frequently Asked Questions

Which building code does Idaho use?

The Idaho Building Code Board adopts editions under Idaho Code 39-4109. Its rules, IDAPA 24.39.30, adopt the 2018 International Building Code, parts I, II, III and IX of the 2018 International Residential Code, the 2018 International Existing Building Code and the 2018 International Energy Conservation Code, each with Idaho amendments.

Can my city change the Idaho Residential Code?

Within limits. Local governments may amend the administrative, definitions, design criteria (Section R301) and appendix parts to reflect local concerns. Other parts of Part III may be amended only after a finding of good cause for building or life safety, a public hearing and notice. They can't adopt residential code provisions the state board hasn't adopted (Idaho Code 39-4116(4)).

Does Idaho require fire sprinklers in new homes?

No. All single-family homes and dwellings up to two units are exempt from code provisions that would require automatic fire sprinklers. You can install one voluntarily (Idaho Code 39-4116(3)).

Does a remodel force me to bring the whole house up to code?

Generally no. Apart from accessibility requirements, a permit can't require upgrades to unaffected existing parts of a building that met the code in effect when they were built, unless the building department identifies and proves a specific substantial safety hazard created by the new work (Idaho Code 39-4111(3)).