Contractors in Idaho Falls, Idaho
Bonneville County • Population: 71,785
Showing 48 verified contractors
Quick answer
Anyone doing work that needs a building permit inside Idaho Falls city limits needs an active city contractor license as well as the state registration or trade license. Residential general contractors hold a Class B or C city license, roofers a Class D. Homeowners doing their own work on a single-family home need permits but no license. Permits and inspections go through the city's Cityworks portal.
Idaho Falls is one of the few Idaho cities that licenses building contractors itself. A contractor working here needs the state registration or trade license that every Idaho contractor needs, plus an active city license for any job that requires a building permit. That gives you an extra record to check before you hire.
Two licenses to check
The state record. Every contractor on a project of $2,000 or more must be registered with the Idaho Contractors Board, and electricians, plumbers and HVAC contractors hold DOPL trade licenses. Search either on DOPL's registration search. The Idaho licensing guide explains what the state record shows.
The city license. The city's Contractor Licensing page says anyone performing work that requires a building permit within city limits must hold an active Idaho Falls contractor's license, and that the city's requirements differ from the state's. The classes:
| Class | What it covers |
|---|---|
| A | Building contractor, all types of building construction |
| B | Building contractor, buildings up to three stories |
| C | Building contractor, residential one- and two-family dwellings |
| D | Subcontractor: roofing, concrete, drywall, framing, masonry, telecommunication equipment |
The city lists which license each trade needs:
- Residential general contractor: Class B or C, plus state licensing.
- Commercial general contractor: Class A or B, plus state licensing.
- Roofer: Class D, plus state licensing.
- Plumbing, electrical and HVAC: state licensure.
To qualify, a contractor passes an International Code Council trade exam, holds a bachelor's degree in architecture, engineering or construction management, or holds a reciprocal license from one of the states the city accepts. City licenses expire one year after issuance, and renewal requires 8 hours of continuing education for Classes A, B and C and 4 hours for Class D. Ask a contractor for the city license number along with the state number, and confirm it with the Building Division if anything looks off.
Permits and inspections
The Building Division handles building, electrical, mechanical and plumbing permits. Its Building page says licensed contractors are responsible for securing all required permits before work starts, that no inspections can be made until the permits are issued, and that starting work without a required permit doubles the fee for that project.
Applications, fee payments and inspection requests go through Cityworks, the city's online permitting system. Homeowners, contractors, engineers and surveyors each set up an account. The city warns that it does not send invoices for permit payments: all payments go through the Cityworks portal, and a request to pay a permit by wire transfer is a scam.
The city's building FAQs say a permit is required for patio covers, carports and sheds, for detached structures over 120 square feet, for additions, interior remodels and plumbing or electrical changes, and for water heater and furnace installs, which also get a follow-up inspection. A new fence needs a fence permit.
Doing the work yourself
If you live in a single-family home and do your own construction, alteration, repair or maintenance, the city says you need permits but no license. Finish work such as trim, carpeting, flooring and painting needs no permit and no license. State law separately lets an owner do their own electrical, plumbing and HVAC work on their home; the trade permit and inspection still apply.
Older homes and lead paint
The Building Division reminds residents that renovation, repair and painting that disturbs lead-based paint in a home built before 1978 must be done by an EPA Certified Renovator working for an EPA Certified Firm. The EPA lead line is (800) 424-5323. More on lead-safe renovation in Idaho.
Before you sign
- Check the state registration or trade license and the city license.
- On a home project over $2,000, get the written disclosure Idaho Code 45-525 requires before you sign. See homeowner disclosure rules.
- Confirm who pulls the permit in Cityworks, and don't let work start before it's issued.
- Keep lien waivers and the subcontractor list for final payment (Idaho lien law).
The hiring checklist covers each step. Nearby, see contractors in Ammon and Rigby, or all of Bonneville County. Browse Idaho Falls plumbers, electricians, HVAC contractors, roofers and remodelers.
Sources
- City of Idaho Falls, Contractor Licensing: who needs a city license, classes, qualification, fees, renewal and continuing education.
- City of Idaho Falls, Building: permit rules, double fee, lead paint notice, Building Division address and phone.
- City of Idaho Falls, Cityworks Online Permitting System: online permits, inspections and the payment warning.
- City of Idaho Falls, Building Contractor License Application: classes and fees.
- City of Idaho Falls FAQs: which projects need permits.
- DOPL registration search: state registration and trade licenses.
Frequently asked questions
Does Idaho Falls require a city contractor license?
Yes. The city requires anyone performing work that needs a building permit inside city limits to hold an active Idaho Falls contractor license, separate from state registration. Residential general contractors need Class B or C plus state licensing, and roofers need Class D plus state licensing. Plumbing, electrical and HVAC contractors need state licensure.
Can I pull my own building permit in Idaho Falls?
Yes, if you live in the single-family home (or accessory structure) and do the construction, alteration, repair or maintenance yourself. The city says those homeowners need permits but no license. Finish work such as trim, carpeting, flooring and painting needs neither a permit nor a license.
What happens if work starts in Idaho Falls without a permit?
The city's Building Division says starting building, electrical, mechanical or plumbing work without the required permit doubles the fee for that project, and no inspections can be made until the permits are issued.
How do I contact the Idaho Falls Building Division?
The Building Division is at 380 Constitution Way, P.O. Box 50220, Idaho Falls, ID 83405, phone (208) 612-8270. Permit applications, fee payments and inspection requests go through the city's Cityworks online permitting system.