Contractors in Twin Falls, Idaho
Twin Falls County • Population: 56,216
Showing 41 verified contractors
ποΈSiding in Twin Falls
π¦Gutter Cleaning in Twin Falls
Quick answer
Inside Twin Falls city limits, the city's Building Safety Department issues permits and does every inspection, and it needs the contractor's State of Idaho registration or license number before a permit is pulled. All electrical, plumbing, mechanical and gas work needs a permit, as do additions, new windows, detached buildings over 200 square feet and fences over 7 feet. Reroofing, interior paint and carpet don't. In the Area of Impact outside city limits, the county and the state inspect instead.
Twin Falls, the Twin Falls County seat, runs a full Building Safety Department for building, electrical, plumbing and mechanical work inside city limits. Where your address sits matters: just outside the city, in the Area of Impact, a different set of agencies inspects the job.
Check the contractor
The city's FAQ says the city will need your contractor's State of Idaho registration or license number before permits can be pulled. There's no separate city license described, so search the business on DOPL's registration search. A contractor on a project of $2,000 or more needs a Contractors Board registration, and electrical, plumbing and HVAC work needs a contractor licensed by that DOPL board. The Idaho licensing guide explains the state rules.
What needs a permit
From the city's permit requirements page:
Permit required
- Additions to any structure, such as sunrooms, attached and detached garages and pools
- All electrical, plumbing, mechanical and gas work
- New single-family homes (check setbacks and easements first)
- Residential detached accessory buildings over 200 square feet
- Fences over 7 feet tall
- Most alterations, including new built-up roofs or trusses and new windows
- Any work in the historic preservation district, which goes to the commission first
- Starting a business from your home
No permit
The city points to section 105.2 of the 2018 International Residential Code for the full exempt list and gives interior wall paint, reroofing and replacing carpet as examples. It adds that an exemption from a permit doesn't authorize work that breaks the city's or the state's codes.
Each kind of work needs its own permit. The city's FAQ says framing and wall changes go on a building permit, while HVAC, gas, electrical and plumbing work each need a separate mechanical, electrical or plumbing permit, and homeowners working on their own primary residence must still pull them.
Applying
The Building Safety Department is at 203 Main Avenue East, Twin Falls, ID 83301, (208) 735-7238. Permits go through the city's online permit portal. The department offers consultation inspections to homeowners as well as contractors, and asks you to call before starting if you're unsure whether a job needs a permit.
Fees are on the city's master fee schedule.
Historic preservation district
Projects in the historic preservation district need commission approval before a permit is issued. Call Planning & Zoning at (208) 735-7267 before you sign a contract for exterior work there.
Inside the city vs. the Area of Impact
The city's FAQ explains who inspects where:
| Location | Building and HVAC/mechanical | Electrical and plumbing |
|---|---|---|
| Inside Twin Falls city limits | City Building Safety Department | City Building Safety Department |
| Twin Falls Area of Impact | Twin Falls County | State of Idaho |
If you live just outside the city, ask your contractor which permits they're pulling and from whom.
Before you sign
- Check the state registration or trade license.
- On a home project over $2,000, get the Idaho Code 45-525 disclosure before you sign (homeowner disclosure rules).
- Make sure every permit the job needs is issued before work starts.
- Collect lien waivers and the subcontractor list before final payment (Idaho lien law).
The hiring checklist covers each step. Nearby, see Jerome and Burley, or all of Twin Falls County. Browse Twin Falls plumbers, electricians, HVAC contractors, roofers and remodelers.
Sources
- City of Twin Falls, Permit Responsibilities and Requirements: what needs a permit, exemptions, historic district, contact, portal.
- City of Twin Falls, Building Safety FAQs: state registration needed for permits, separate trade permits, Area of Impact inspections.
- City of Twin Falls, Master Fee Schedule: permit fees.
- DOPL registration search: state registration and trade licenses.
Frequently asked questions
Does Twin Falls require a city contractor license?
No separate city license is described. The city's FAQ says it needs your State of Idaho registration or license number before you can pull permits, so the state record is what to check.
Do I need a permit to reroof in Twin Falls?
The city's permit requirements page gives reroofing, interior wall paint and replacing carpet as examples of work that doesn't need a permit. New built-up roofs or trusses, and new windows, do.
Do homeowners need permits in Twin Falls?
Yes. The city's FAQ says homeowners working on their primary residence must still get the required permits, and each type of work needs its own permit: building, electrical, plumbing or mechanical.
Who inspects projects in the Twin Falls Area of Impact?
Inside city limits, the City Building Safety Department does all inspections. In the Area of Impact, the city's FAQ says Twin Falls County handles building and HVAC/mechanical inspections and the state handles electrical and plumbing.